Fisher & Paykel Washer Error Code E1

• Ensure the washer is powered off and unplug from the electrical outlet • Verify the power outlet is functioning by plugging in another appliance • Check your home's circuit breaker panel to confirm the breaker hasn't tripped; reset if necessary • Visually inspect the door frame and lid for any visible debris, lint, or foreign objects and clean thoroughly • Gently attempt to close the door or lid fully and listen for a definitive click indicating proper latching • Verify the door gasket or rubber seal is not torn, cracked, or misaligned • Confirm the washer is completely empty of water and laundry • Check that inlet water supply valves behind the washer are turned fully open • Inspect both inlet hoses for kinks, pinches, or blockages that could affect water flow • Ensure you are using the correct amount of detergent recommended for your water hardness and load size • Verify loads are balanced and not overloaded, which can affect door locking • Perform a complete reset: Turn off the power at the circuit breaker for 60 seconds, then turn it back on and attempt a test cycle • If the error persists after these checks, contact a professional appliance repair technician or appliance repair support service to diagnose the door lock assembly